Main Article Content

Abstract

The paper represents analytical dependences of the precipitation process on the kinematically possible flow velocities that satisfy the boundary conditions and the condition of volume constancy.

Keywords

Deformation draft power intensity

Article Details

How to Cite
Fatkhulla Abdullaev, Xasan Ismailov, Shoxrux Akhmadayiev, & Kamaliddin Khasanov. (2021). Determination of Force Factors During Precipitation. International Journal on Orange Technologies, 3(3), 261-264. https://doi.org/10.31149/ijot.v3i3.1494

References

  1. A. G. Ovchinnikov, E. P. Unksov "Theory of forging and stamping". Moscow "Mashinostroenie", 1992 y.
  2. P. I. Polukhina " Theoretical foundations of metal forming (theory of plasticity)” Moscow "Metallurgy" 1980 y.
  3. M. V. Storozhev and E. A. Popov "Theory of metal forming", Moscow "Mashinostroenie", 1971 y.
  4. L. I. Zhivov, A. G. Ovchinnikov, E. N. Skladchikov "Forging and stamping equipment", Moscow, Bauman Moscow State Technical University, 2006 y.
  5. V. L. Kolmogorov "Mechanics of metal forming", Moscow "Metallurgy", 1986 y.
  6. TURAKHODJAEV, N., TURSUNBAEV, S., UMAROVA, D., KUCHKOROVA, M., & BAYDULLAEV, A. Influence of Alloying Conditions on the Properties of White Cast Iron. International Journal of Innovations in Engineering Research and Technology, 7(12), 1-6.
  7. Turakhodjaev, N., Turakhujaeva, S., Turakhodjaev, S., Tursunbaev, S., Turakhodjaeva, F., & Turakhujaeva, A. (2020). Research On Heat Exchange In Melting Process. Solid State Technology, 63(6), 6653-6661.
  8. Yu. A. Lavrinenko, S. A. Evsyukov, V. Yu. Lavrinenko " Volume stamping on automatic machines”, Moscow, Bauman Moscow State Technical University, 2014 y.
  9. V. A. Ogorodnikov, I. A. Derevenko, L. I. Alieva " Resource of metal plasticity under cold volumetric shape change”, Vinnytsia VNTU 2016 y.
  10. Турсунбаев, С. А., Зокиров, Р. С., & Тураев, Х. У. (2017). Влияние обработки деталей из алюминиевого сплава с применением высокоскоростных токарных станков на срок службы резца. In ТЕХНИКА И ТЕХНОЛОГИИ МАШИНОСТРОЕНИЯ (pp. 159-163).