SELECTION OF THE CHEMICAL COMPOSITION OF STEELS AND THEIR THERMAL HARDENING MODE USING A COMPUTER PROGRAM
Keywords:
heat treatment, dislocation density, extreme temperature, low-alloy steel, computer program
Abstract
The relationships between the parameters of the structure of heat-treated steels and their abrasive wear resistance are established. At all temperatures of the final tempering of hardened steel, there is a direct relationship between its structure parameters and wear resistance when sliding friction against loose abrasive particles.
References
1. Berenshteyn D.B. Abrazivnoye iznashivaniye lemexnogo lezviya i rabotosposobnost pluga // Traktori i selskoxozyaystvenniye mashina. 2002. № 6. pp. 39–42.
2. Dyuchenko S.S. Heredity in phase transformation: mechanism of the phenomenon and effect on the properties // Metall Science and heat treatment. 2000. Vol. 42. № 3. рр. 122–126.
3. Shishkov M.M. Marochnik staley i splavov: Spravochnk. Izd. 3-ye dopolnennoye. – Donesk: Yugo-Vostok, 2002. 456 p.
4. Garkunov D. N. Tribotexnika. M.: MSXA, 2005. 356 p.
5. Batayev V.A., Batayev A.A., Alximov A.P. Metodi strukturnogo analiza materialov i kontrolya kachestva detaley. M.: Nauka, 2007. 224 p.
6. Gorelik S.S., Skakov Yu.A., Rastvorguyev L.N. Rentgenograficheskiy i elektronno-opticheskiy analiz. M.: MISiS, 1994. 328 p.
7. Berdiev D.M., Yusupov A.A. Improving the wear resistance of gear teeth by cyclic quenching with Inductive Heating // Russian Engineering Research. 2020. V. 40. no. 6. pp. 473–475.
8. Saviskiy I.A., Skakov Yu.A. Vliyaniye deformatsii na shirinu rentgenovskix liniy i pereraspredeleniye ugleroda // Izv. vuzov. Chernaya metallurgiya. 1992. № 9. P. 123–126.
9. Berdiev D.M., Umarova M.A., Toshmatov R.K. Phase and structural transformations of structural steels in nontraditional heat treatment // Russian Engineering Research. 2021. Vol. 41, no. 1, pp. 46–48
10. Bokshteyn S.Z. Struktura i mexanicheskaya svoystva legirovannoy stali. M.: Metallurgiya. 1994. 287 p.
2. Dyuchenko S.S. Heredity in phase transformation: mechanism of the phenomenon and effect on the properties // Metall Science and heat treatment. 2000. Vol. 42. № 3. рр. 122–126.
3. Shishkov M.M. Marochnik staley i splavov: Spravochnk. Izd. 3-ye dopolnennoye. – Donesk: Yugo-Vostok, 2002. 456 p.
4. Garkunov D. N. Tribotexnika. M.: MSXA, 2005. 356 p.
5. Batayev V.A., Batayev A.A., Alximov A.P. Metodi strukturnogo analiza materialov i kontrolya kachestva detaley. M.: Nauka, 2007. 224 p.
6. Gorelik S.S., Skakov Yu.A., Rastvorguyev L.N. Rentgenograficheskiy i elektronno-opticheskiy analiz. M.: MISiS, 1994. 328 p.
7. Berdiev D.M., Yusupov A.A. Improving the wear resistance of gear teeth by cyclic quenching with Inductive Heating // Russian Engineering Research. 2020. V. 40. no. 6. pp. 473–475.
8. Saviskiy I.A., Skakov Yu.A. Vliyaniye deformatsii na shirinu rentgenovskix liniy i pereraspredeleniye ugleroda // Izv. vuzov. Chernaya metallurgiya. 1992. № 9. P. 123–126.
9. Berdiev D.M., Umarova M.A., Toshmatov R.K. Phase and structural transformations of structural steels in nontraditional heat treatment // Russian Engineering Research. 2021. Vol. 41, no. 1, pp. 46–48
10. Bokshteyn S.Z. Struktura i mexanicheskaya svoystva legirovannoy stali. M.: Metallurgiya. 1994. 287 p.
Published
2023-11-30
How to Cite
D. M. BERDIEV, М. А. UМАRОVА, & T. N. IBODULLAEV. (2023). SELECTION OF THE CHEMICAL COMPOSITION OF STEELS AND THEIR THERMAL HARDENING MODE USING A COMPUTER PROGRAM. International Journal on Orange Technologies, 5(11), 71-77. Retrieved from https://journals.researchparks.org/index.php/IJOT/article/view/5013
Section
Articles
