Influence of The Design of The Rolling Roller on The Quality of The Surface Layer During Plastic Deformation on the Workpiece

Qosimova Z.M; RubidinovSh.G

doi:10.31149/ijhcs.v3i2.1659

Authors

Qosimova Z.M Senior Lecturer, Department of Mechanical Engineering and Automation, Fergana Polytechnic Institute,Fergana, Uzbekistan
RubidinovSh.G
[email protected]
Assistant of the Department of Mechanical Engineering and Automation, Fergana Polytechnic Institute,Fergana, Uzbekistan

Vol. 3 No. 2 (2021): IJHCS

Articles

April 27, 2021

Downloads

pdf

Abstract
How to Cite
Metrics
References

The method of surface plastic deformation of the outer diametrical surfaces of machine parts, where the deformation is transferred by the tool element, which is a rolling tool with two working profile radii, and the tool is additionally imparted with a rotational motion about the OX axis passing through the plane connecting the two rollers and perpendicular to the axis OY blanks. The effect of deformation kinematics on the quality characteristics of the hardened layer of manufactured parts is considered: roughness, residual stresses, workhardening depth, hardness HRC, HB and microhardness. The analysis of the efficiency of parts hardening when machining with a roller with two radii, in comparison with deformation by a roller with one radius

Qosimova Z.M, & RubidinovSh.G. (2021). Influence of The Design of The Rolling Roller on The Quality of The Surface Layer During Plastic Deformation on the Workpiece. International Journal on Human-Computing Studies, 3(2), 257–263. https://doi.org/10.31149/ijhcs.v3i2.1659

Download Citation

Nomanjonov, S., et al. "STAMPDESIGN." Экономика и социум 12 (2019): 101-104.

Тешабоев, АнварЭргашeвич, etal. "МАШИНАСОЗЛИКДА ЮЗА ТОЗАЛИГИНИ НАЗОРАТИНИ АВТОМАТЛАШ." Scientificprogress 1.5 (2021).

Рубидинов, ШохрухҒайратжонЎғли. "БИКРЛИГИ ПАСТ ВАЛЛАРГА СОВУҚ ИШЛОВ БЕРИШ УСУЛИ." Scientificprogress 1.6 (2021): 413-417.

Nomanjonov, S. N. "Increase The Wear Resistance And Service Life Of Dyes Based On Modern Technologies." The American Journal of Engineering and Technology 2.12 (2020): 67-70.

Файзиматов, ШухратНумонович, ШухратМахмуджоновичАбдуллаев, and АхаджонАкрамжонўғлиЎлмасов. "КИЧИКДИАМЕТРГАЭГАБЎЛГАНЧУҚУРТЕШИКЛАРНИДОРНАЛАРЁРДАМИДАИШЛОВБЕРИШДАЮЗААНИҚЛИГИНИОШИРИШ." ScienceandEducation 2.3 (2021): 181-187.

O’LmasovAhadjonAkramjon, O’G. "NEW APPROACHES IN THE DIAGNOSIS AND MONITORING OF ROTOR OSCILLATIONS USING SHAFT SENSORS." Science and Education 1.1 (2020).

Отақулов, ОйбекХамдамович, and РасулКаримовичТаджибоев. "КОМПРЕССОРВАЛЛАРИДАГИСАЛБИЙТИТРАШЛАРНИБАРТАРАФЭТИШДАКИМЁВИЙТЕРМИКИШЛОВБЕРИБЦЕМЕНТИТЛАШЖАРАЁНИНИНГМЕТОДОЛОГИЯСИВААФЗАЛЛИКЛАРИ." МОЛОДОЙ ИССЛЕДОВАТЕЛЬ: ВЫЗОВЫ И ПЕРСПЕКТИВЫ. 2020.

Fayzimatov, Sh N., Y. Y. Xusanov, and D. A. Valixonov. "Optimization Conditions Of Drilling Polymeric Composite Materials." TheAmericanJournalofEngineeringandTechnology 3.02 (2021): 22-30.

Fayzimatov, B. N., and Yu YuXusanov. "PROBLEMS OF GLASS SURFACE QUALITY FORMATION FOR MECHANICAL PROCESSING." Scientific-technicaljournal 22.2 (2018): 35-39.

Файзимтов, ШухратНуманович, andМухаммадазимАкбаралиевичРустамов. "ПРИМЕНЕНИЕ ПРОГРЕССИВНЫХ МЕТОДОВ ДЛЯ ОРИЕНТАЦИИ И УСТАНОВКИ ЗАКЛЕПОК В ОТВЕРСТИЕ С ГОРИЗОНТАЛЬНОЙ ОСЬЮ." НАУЧНЫЙ ПОИСК В СОВРЕМЕННОМ МИРЕ. 2017.

Файзиматов, Ш. Н., and М. А. Рустамов. "АЭРОДИНАМИЧЕСКИЙ ЭФФЕКТ ДЛЯ АВТОМАТИЗАЦИИ ПРОЦЕССА ПЕРЕКАЧКИ ХИМИЧЕСКИХ АГРЕССИВНЫХ РЕАГЕНТОВ." Современныеисследования 6 (2018): 112-115.

Тураев, ТиркашТураевич, ЯкубАнвархаджаевичБатиров, and БобурбекАбдулҳакимЎғлиТожиев. "Модернизацияпроцессаволоченияпроволочногоизделия." Universum: техническиенауки 3 (60) (2019).

Тураев, ТиркашТураевич, ЯкубАнварходжаевичБатиров, andБахромМиродиловичМадаминов. "Сравнительной оценки технического уровня станков и станочных систем." Збірникнауковихпраць ΛΌГOΣ (2021).

Turaevich, TuraevTirkash, and MadaminovBakhromMirodilovich. "Physical Foundations Structural-Formation, Surface Layer Of Parts." TheAmericanJournalofEngineeringandTechnology 2.09 (2020): 71-76.

Teshabaev, Anvar, and RakhimovSharifjon. "The innovation activity on large uzbekcompanyas a key factor of personnel development." ACADEMICIA: AnInternationalMultidisciplinaryResearchJournal 10.5 (2020): 416-423.

Turakhodjaev, Nodir, et al. "EFFECT OF METAL CRYSTALLATION PERIOD ON PRODUCT QUALITY." Theoretical&AppliedScience 11 (2020): 23-31.

Nodir, Turakhodjaev, et al. "Development Of Technology To Increase Resistance Of High Chromium Cast Iron." The American Journal of Engineering and Technology 3.03 (2021): 85-92.

SHIRINKHON, TURAKHUDJAEVA, TURAKHUJAEVA AZIZAKHON, and SAIDMAKHAMADOV NOSIR. "Methods For Reducing Metal Oxidation When Melting Aluminum Alloys." International Journal of Innovations in Engineering Research and Technology 7.10 (2020): 77-82.