Minimizing the Consumption of Working Time when Machining the Connecting Rod by Optimizing the Machine Tool"

  • Isakhanov Khamidulla Candidate of Engineering Sciences, Namangan Engineering Technology Institute, Uzbekistan
  • Akramova Komila Shukhratkizi Student, Namangan Engineering Technology Institute, Uzbekistan
DOI: https://doi.org/10.31149/ijhcs.v4i1.2612
Keywords: Connecting rod, rod, piston head, crank head, stamping, flats, fixture

Abstract

This article contains general information about the connecting rods, its structure, methods of obtaining. Also, the calculation of the machine tool for milling the connecting rod flats was made.

References

1. Reference technologist - machine builder. 1 vol. Ed. A.G. Kosilova and R.K. Meshcheryakova. - M .: Mashinostroenie, 1985.
2. Swamps H. L. and Kastromin F. P. - Machine tools. Ed. 5th, revised, and additional. M., "Engineering", 1973
Published
2022-01-18
How to Cite
Khamidulla, I., & Shukhratkizi, A. K. (2022). Minimizing the Consumption of Working Time when Machining the Connecting Rod by Optimizing the Machine Tool". International Journal of Human Computing Studies, 4(1), 10-12. https://doi.org/10.31149/ijhcs.v4i1.2612
Issue
Vol. 4 No. 1 (2022): IJHCS
Section
Articles