"Analysis of the Technological Sketch of the Shaft, Developed using the Program Corel Draw"

  • Akramova Dilafruz Shukhratkizi Master student, Namangan Engineering Construction Institute, Uzbekistan
  • Fatkhullaev Alisher Abdurashidugli Master student, Namangan Engineering Construction Institute, Uzbekistan
DOI: https://doi.org/10.31149/ijhcs.v4i1.2614
Keywords: Technological, Corel Draw, Developed, Analysis, Shaft

Abstract

At first sight, the "Shaft" part would seem to have a simple structure in relation to other machine parts. But, sometimes Shafts are found with a very complex design. Their complexity is explained by the presence in their design of such surfaces as: grooves, chamfers, threaded surfaces, flats, beads, grooves, groove holes, fillets, etc., the images of which are shown below.

References

1. Levyatov D.S., Soskin G.B. Calculations and design of machine parts: Textbook: for universities. M .: Higher school, 1986. - 280 p.
2. Maslov D.P. Mechanical engineering technology: Textbook. manual for tech. uch-sch. L.: Mashgiz, 1958.424 s
3. Tutorial training Corel Draw: https://tct.ru/upload/elekt_uchebnik/Corel/index.html
Published
2022-01-18
How to Cite
Shukhratkizi, A. D., & Abdurashidugli, F. A. (2022). "Analysis of the Technological Sketch of the Shaft, Developed using the Program Corel Draw". International Journal of Human Computing Studies, 4(1), 16-19. https://doi.org/10.31149/ijhcs.v4i1.2614
Issue
Vol. 4 No. 1 (2022): IJHCS
Section
Articles