The Tension Forces Acting on the Belt Conveyor Rollers
Keywords:
Belt conveyor, belt, roller, roller base, damper, power
Abstract
This article determines the distribution of the forces applied to the cross-sectional surface of the belt, when rocks are transported by belt conveyors, the effect of dynamic forces on the bending of the belt and middle roller length rocks on the basis forces the roller supports.
References
1. Atakulov LN, Khaidarov Sh.B., Istablaev F.F., Narzullaev B.Sh. Investigation of an alternative method of connecting rubber cord belts. Achievements, problems and modern trends in the development of the mining and metallurgical complex IX International Scientific and Technical Conference. 2017
2. Atakulov LN, Khaidarov Sh.B., Istablaev F.F., Narzullaev B.Sh. Determination of the method of connecting rubber cord belts. Achievements, problems and modern trends in the development of the mining and metallurgical complex IX International Scientific and Technical Conference. 2017
3. Kharchenko V.I. Rationalization of geometric parameters of linear roller bearings of general-purpose belt conveyors at the design stage. / V.I. Kharchenko. - M., 1994 - 248 p.
4. Galkin V.I. Modern theory of belt conveyors for mining enterprises. V.I. Galkin, V.G. Dmitriev, V.P. Dyachenko et al. - Moscow: MSGU Publishing House, 2005. - 543 p.
5. Seyed Ali Shodjaatolxoseyni. Obosnovanie ratsionalnix parametrov rolikoopor lineynix sektsiy moshnix lentochnix konveyerov gornix predpriyatiy. M. 2009
6. Lodewijks G. Energy Consumption of Pipe Belt Conveyors: Indentation Rolling Resistance / G. Lodewijks, M. Zamiralova // FME Transactions. - 2012. Vol. 40. - P. 171 - 176.
7. Kiriya R.V. Determination of the coefficient of resistance to the movement of the belt along the roller supports of the conveyor, due to the bending of the belt / Kiriya R.V., Maksyutenko V.Yu., Mishchenko T.F.//Geotechnical mechanics: Interdepartmental. Sat. scientific. tr. / IGTM NASU. - Dnepropetrovsk, 2012. - Issue. 106. - S. 140-146.
8. Atakulov L.N., Haydarov Sh.B., Ochilov Kh.B., Gaffarov A.A. Application of the scheme of effective conveyor transport in the conditions of Daugiztau quarry. Technical science and innovation. 2021. No. 2. -b. 74-86.
9. Atakulov L.N., Kakharov S.K., Haydarov Sh.B. Selection of the optimal method for joining rubber-cord conveyor belts. Scientific, technical and production journal
10. "Gorniy jurnal". – Rossiya, Moscow, 2018, # 9 (2254), 97-100 p
11. Shakhodjaev L.Sh. Calculation of mine conveyor transport: methodological instruction, Tashkent: 2012
2. Atakulov LN, Khaidarov Sh.B., Istablaev F.F., Narzullaev B.Sh. Determination of the method of connecting rubber cord belts. Achievements, problems and modern trends in the development of the mining and metallurgical complex IX International Scientific and Technical Conference. 2017
3. Kharchenko V.I. Rationalization of geometric parameters of linear roller bearings of general-purpose belt conveyors at the design stage. / V.I. Kharchenko. - M., 1994 - 248 p.
4. Galkin V.I. Modern theory of belt conveyors for mining enterprises. V.I. Galkin, V.G. Dmitriev, V.P. Dyachenko et al. - Moscow: MSGU Publishing House, 2005. - 543 p.
5. Seyed Ali Shodjaatolxoseyni. Obosnovanie ratsionalnix parametrov rolikoopor lineynix sektsiy moshnix lentochnix konveyerov gornix predpriyatiy. M. 2009
6. Lodewijks G. Energy Consumption of Pipe Belt Conveyors: Indentation Rolling Resistance / G. Lodewijks, M. Zamiralova // FME Transactions. - 2012. Vol. 40. - P. 171 - 176.
7. Kiriya R.V. Determination of the coefficient of resistance to the movement of the belt along the roller supports of the conveyor, due to the bending of the belt / Kiriya R.V., Maksyutenko V.Yu., Mishchenko T.F.//Geotechnical mechanics: Interdepartmental. Sat. scientific. tr. / IGTM NASU. - Dnepropetrovsk, 2012. - Issue. 106. - S. 140-146.
8. Atakulov L.N., Haydarov Sh.B., Ochilov Kh.B., Gaffarov A.A. Application of the scheme of effective conveyor transport in the conditions of Daugiztau quarry. Technical science and innovation. 2021. No. 2. -b. 74-86.
9. Atakulov L.N., Kakharov S.K., Haydarov Sh.B. Selection of the optimal method for joining rubber-cord conveyor belts. Scientific, technical and production journal
10. "Gorniy jurnal". – Rossiya, Moscow, 2018, # 9 (2254), 97-100 p
11. Shakhodjaev L.Sh. Calculation of mine conveyor transport: methodological instruction, Tashkent: 2012
Published
2023-01-30
How to Cite
[1]
Nematovich, A.L., Bahridinovich, H.S. and Arzimurodovich, O.D. 2023. The Tension Forces Acting on the Belt Conveyor Rollers. International Journal on Integrated Education. 6, 1 (Jan. 2023), 163-167. DOI:https://doi.org/10.17605/ijie.v6i1.3953.
Section
Articles
In submitting the manuscript to the International Journal on Integrated Education (IJIE), the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere,
- The publication has been approved by the author(s) and by responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
License and Copyright Agreement
Authors who publish with International Journal on Integrated Education (IJIE) agree to the following terms:
- Authors retain copyright and grant the International Journal on Integrated Education (IJIE) right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the International Journal on Integrated Education (IJIE) published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
