Some Methods of Discovering a Problem Situation in Teaching Students and Resolving the Situation
Keywords:
Creativity, Problem Situation, Computer Packages, Downloadable Program, Orientation Packages, Moving Coordinates
Abstract
This article is dedicated to the audience's opinion on creating a problem situation during the course of the lesson, creating a short program suitable for this topic and finding the correct solution to the problem created using it. When learning in technical sciences, a subject is covered using a downloadable program, as it differs from existing software packages, the order of the lesson is given based on the above-mentioned idea.
References
1. Двуличанская Н. Н. Интерактивные методы обучения как средство формирования ключевых компетенций [Interactive teaching methods as a means of forming key competencies] // Наука и образование: электронное научно-техническое издание, 2011
2. Косолапова М.А., Ефанов В.И. Развитие профессиональной компетентности преподавателя технического вуза при повышении квалификации [Development of professional competence of a teacher of a technical university during advanced training] //21 Материалы международной научно-методической конференции «Современное образование: проблемы обеспечения качества подготовки специалистов в условиях перехода к многоуровневой системе высшего образования» Томск: ТУСУР, 2012, с. 161-162.
3. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. “About the one method of creation of electronic textbooks”, ACADEMICIA An International Multidisciplinary Research Journal ISSN: 2249-7137 Vol. 11, Issue 4, April 2021 Impact Factor: SJIF 2021 = 7.492. P.511-518.
4. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Creation of Learning the Subject of “Theoretical Mechanics” with the Help of Modern Information Technology, International Journal of Innovative Analyses and Emerging Technology. |e-ISSN: 2792-4025| Pp. 102-106. 2021-11-16.
5. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Oliy oʻquv yurtlarida mashinasozlik texnologiyasi yo’nalishiga doir fanlarini o’qitishning dolzarb masalalari [Current issues of teaching subjects related to mechanical engineering technology in higher educational institutions]. «Ta’lim tizimida innovatsiya, integratsiya va yangi texnologiyalar» va respublika ilmiy-amaliy anjumani materiallari. Namangan, 26-aprel 2021 yil. 177-183 b.
6. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Texnika oliy o‘quv yurtlarida texnik mexanika fanini o‘qitishda interfaol metodni qo’llash [Application of interactive method in teaching technical mechanics in technical higher educational institutions], “Qurilish sohasida bunyodkorlik ko‘lami va uning istiqbollari” mavzusida respublika ilmiy-amaliy konferensiyasi. Toshkent arxitektura-qurilish instituti huzuridagi Olmaliq arxitektura-qurilish texnikumi. – Olmaliq, 2022 yil 11 iyun. 13-16 b.
7. Mansurov M.T., Raxmonkulov R., Toshtemirova G.A. Oʻzgarmas qalinlikdagi doiraviy plastinkalarni avtomatik loyihalash (simmetrik egilish holati uchun) [Automatic Design of Circular Plates of Constant Thickness (For Symmetric Bending Case)]”. “Машинасозликда инновациялар, энергиятежамкор технологиялар ва ресурслардан фойдаланиш самарадорлигини ошириш” мавзусида Халқаро миқёсдаги илмий-амалий конференция. Наманган шаҳри 28-29 май 2021 йил. 492-495 б.
8. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Mashina detallarini tayyorlash kadrlarini RDB dastgohlari uchun yozishni matematik modellashtirish va vizuallashtirish [Mathematical modeling and visualization of the recording of machine detailing frames for RDB machines]. DGU 12795 22.10.2022
9. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Texnika oliy o’quv yurtlarida texnik mexanika fanini o’qitishda interfaol metodini qoʻllash [Application of the interactive method in the teaching of technical mechanics in technical higher educational institutions]. “Qurilish sohasida bunyodkorlik ko‘lami va uning istiqbollari” mavzusida 2022-yil 11-iyunda o‘tkazilgan respublika ilmiy-amaliy konferensiya maqolalar to‘plami. – Olmaliq, 2022. - 13-16 b.
10. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Talabalarning oʻquv-ijodiy faolligini triz texnologiyalar vositasida rivojlantirish [Development of educational and creative activity of students with the help of triz technologies]. “Zamonaviy mashinasozlikda innovasion texnologiyalarni qo‘llashning ilmiy asoslari: tajriba va istiqbollar” 23-24 sentyabr, 2022 yil, Namangan shahri 463-466 b
2. Косолапова М.А., Ефанов В.И. Развитие профессиональной компетентности преподавателя технического вуза при повышении квалификации [Development of professional competence of a teacher of a technical university during advanced training] //21 Материалы международной научно-методической конференции «Современное образование: проблемы обеспечения качества подготовки специалистов в условиях перехода к многоуровневой системе высшего образования» Томск: ТУСУР, 2012, с. 161-162.
3. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. “About the one method of creation of electronic textbooks”, ACADEMICIA An International Multidisciplinary Research Journal ISSN: 2249-7137 Vol. 11, Issue 4, April 2021 Impact Factor: SJIF 2021 = 7.492. P.511-518.
4. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Creation of Learning the Subject of “Theoretical Mechanics” with the Help of Modern Information Technology, International Journal of Innovative Analyses and Emerging Technology. |e-ISSN: 2792-4025| Pp. 102-106. 2021-11-16.
5. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Oliy oʻquv yurtlarida mashinasozlik texnologiyasi yo’nalishiga doir fanlarini o’qitishning dolzarb masalalari [Current issues of teaching subjects related to mechanical engineering technology in higher educational institutions]. «Ta’lim tizimida innovatsiya, integratsiya va yangi texnologiyalar» va respublika ilmiy-amaliy anjumani materiallari. Namangan, 26-aprel 2021 yil. 177-183 b.
6. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Texnika oliy o‘quv yurtlarida texnik mexanika fanini o‘qitishda interfaol metodni qo’llash [Application of interactive method in teaching technical mechanics in technical higher educational institutions], “Qurilish sohasida bunyodkorlik ko‘lami va uning istiqbollari” mavzusida respublika ilmiy-amaliy konferensiyasi. Toshkent arxitektura-qurilish instituti huzuridagi Olmaliq arxitektura-qurilish texnikumi. – Olmaliq, 2022 yil 11 iyun. 13-16 b.
7. Mansurov M.T., Raxmonkulov R., Toshtemirova G.A. Oʻzgarmas qalinlikdagi doiraviy plastinkalarni avtomatik loyihalash (simmetrik egilish holati uchun) [Automatic Design of Circular Plates of Constant Thickness (For Symmetric Bending Case)]”. “Машинасозликда инновациялар, энергиятежамкор технологиялар ва ресурслардан фойдаланиш самарадорлигини ошириш” мавзусида Халқаро миқёсдаги илмий-амалий конференция. Наманган шаҳри 28-29 май 2021 йил. 492-495 б.
8. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Mashina detallarini tayyorlash kadrlarini RDB dastgohlari uchun yozishni matematik modellashtirish va vizuallashtirish [Mathematical modeling and visualization of the recording of machine detailing frames for RDB machines]. DGU 12795 22.10.2022
9. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Texnika oliy o’quv yurtlarida texnik mexanika fanini o’qitishda interfaol metodini qoʻllash [Application of the interactive method in the teaching of technical mechanics in technical higher educational institutions]. “Qurilish sohasida bunyodkorlik ko‘lami va uning istiqbollari” mavzusida 2022-yil 11-iyunda o‘tkazilgan respublika ilmiy-amaliy konferensiya maqolalar to‘plami. – Olmaliq, 2022. - 13-16 b.
10. Raxmonqulov R, Toshtemirov K.Q., Toshtemirova G.A. Talabalarning oʻquv-ijodiy faolligini triz texnologiyalar vositasida rivojlantirish [Development of educational and creative activity of students with the help of triz technologies]. “Zamonaviy mashinasozlikda innovasion texnologiyalarni qo‘llashning ilmiy asoslari: tajriba va istiqbollar” 23-24 sentyabr, 2022 yil, Namangan shahri 463-466 b
Published
2023-04-27
How to Cite
[1]
Rahmonqulovich, R.R., Qahramonovich, T.K. and Ayubjonovna, T.G. 2023. Some Methods of Discovering a Problem Situation in Teaching Students and Resolving the Situation. International Journal on Integrated Education. 6, 4 (Apr. 2023), 184-189. DOI:https://doi.org/10.17605/ijie.v6i4.4289.
Section
Articles
In submitting the manuscript to the International Journal on Integrated Education (IJIE), the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
- That it is not under consideration for publication elsewhere,
- The publication has been approved by the author(s) and by responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
License and Copyright Agreement
Authors who publish with International Journal on Integrated Education (IJIE) agree to the following terms:
- Authors retain copyright and grant the International Journal on Integrated Education (IJIE) right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the International Journal on Integrated Education (IJIE) published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
